Flap Barrier

Introduction: Flap turnstile has standard electrical interface which can be connected with ID cards, IC cards, magnetic cards, barcode cards etc. The integration system ensures passing in order and will never allow unauthorized persons to go in or go out. Parameters: 1. Power Supply: AC220V 10V , 50Hz / AC110V 10V , 60Hz 2. Power Consumption: 100W/ 24V 3. Temperature: -15 to 60 degrees 4. Humidity: 10mA 9. Communication Interface: RS485 ( Distance: < = 1200m) 10. Material: Housing - 304 stainless steel Arm ? Plexiglass 11. Housing Dimension: 1200* 280* 990mm 12. Arm Length: 260mm 13. Working Environment: Indoors or outdoors with shed Main Functions 1. Problem-self-checking function. 2. Arm Turning: Bi-direction 3. When power off, arm open automatically and power on again, arm will be held automatically. 4. When valid card read and passenger passed, arm can be delayed to close from 1-60s which can be set in the control panel. 5. Auto-reposition function: After card read, passenger doesn? t pass within regulated time, turnstile will cancel order automatically. And the regulated time can be set by managers. 6. Anti-rush function: if there is no open single, arm will be holding tightly. 7. Stable running with little noise. Email us: autodoorgate@ ymail.com